Standard Internal Mortice Latches

You are here: Door Handles UK Hinges, Locks, Latches and all Accessories Standard Internal Mortice Latches

JL120 Standard mortice latch

This Item In Stock
£1.50

Choose Size & Finish

63mm Satin St/Steel

63mm Polished St/Steel

63mm Brass

75mm Satin St/Steel

75mm Polished St/Steel

75mm Brass

Quantity:

Available in either 63mm or 75mm. Tested to BS EN 12209, therefore much superior than your average household grade mortice latch!

Comes complete with face plate and strike plate and now available with satin stainless steel, polished stainless steel or polished brass face plate and fixing screws

A 63mm latch will mean the centre of your selected handle or knob will sit 45mm from the edge of the door. This measurement is called the backset, and the 75mm latch has a backset of 57mm.

Bolt through style suitable for lever on rose furniture in our contemporary range

If fitting a door knob or lever where your knuckles may scrape on the door frame, fit a longer latch to allow more clearance when turning the knob. We recommend you fit a latch that's at least 75mm long in this instance.

TL3 Antique Brass/Bronze mortice latch

This Item In Stock
£2.25

Choose Size

64mm

75mm

Quantity:

Available in either 64mm or 75mm and designed to compliment any antique brass or bronze door furniture.

A 63mm latch will mean the centre of your selected handle or knob will sit 45mm from the edge of the door. This measurement is called the backset, and the 75mm latch has a backset of 57mm.

If fitting a door knob or lever where your knuckles may scrape on the door frame, fit a longer latch to allow more clearance when turning the knob. We recommend you fit a latch that's at least 75mm long in this instance.

Note:TL3 latch is not suitable for contemporary lever on rose furniture as it is not a bolt through style latch

Delamain 76mm Antique Brass/Bronze mortice latch DL5030

This Item In Stock
£3.95
Quantity:

Available in either 76mm or 100mm (SEE BELOW) Heavy sprung tubular latch, intended for use with any unsprung or sprung door knobs

75mm latch has a backset of 57mm.

Delamain 100mm Antique Brass/Bronze mortice latch DL5040

This Item In Stock
£4.95
Quantity:

Heavy sprung tubular latch, intended for use with any unsprung or sprung door knobs

JL6666 80mm Architectural Double Sprung Mortice Latch

This Item In Stock
£3.55
Quantity:

80mm overall with 60mm backset (ie, depth from centre of spindle hole to forend plate)

Architectural quality basically means heavy duty. You would select this standard of lock or latch for doors that are in constant use or even subject to abuse. Perhaps in a commercial type environment.

Comes complete with BOTH satin stainless steel & brass plates, simply discard the ones you don't require.

Sizes 100mm & 150mm available below

JL6666 100mm Architectural Double Sprung Mortice Latch

This Item In Stock
£4.60
Quantity:

Comes complete with BOTH satin stainless steel & brass plates, simply discard the ones you don't require.

Sizes 150mm available below

100mm with 75mm backset (ie, depth from centre of spindle hole to forend plate).

JL6666 150mm Architectural Double Sprung Mortice Latch

This Item In Stock
£7.85
Quantity:

Comes complete with BOTH satin stainless steel & brass plates, simply discard the ones you don't require.

150mm with 126mm backset (ie, depth from centre of spindle hole to forend plate).

JL9111 Heavy Duty Industrial Latch 75mm

Comes with either Satin st/steel or Polished st/steel plates.

Size 75mm (57mm handle backset)

You would select this standard of latch for doors that are in constant use

This Item In Stock
£5.85

Select Finish

75mm Satin

75mm Polished

Quantity:

Double doors latch rebate for JL120

Available in brass or silver, This is only required if you are fitting the latch above onto double doors, ie, french doors.

This Item In Stock
£3.20

Choose Required Colour

Quantity:

Double doors latch rebate for JL6666

Available in brass or silver, This is only required if you are fitting the latch above onto double doors, ie, french doors.

This Item In Stock
£4.10

Choose Required Colour

Quantity:

Double doors latch rebate for Antique Brass/Bronze latches

This Item In Stock
£4.99
Quantity:

This is only required if you are fitting the latch above onto double doors, ie, french doors.

compatible with TL3 & DL5030/DL5040 latches